USD
EUR
AUD
GBP
JPY
CAD
Total: $0.00
Taxes and shipping calculated at checkout
Vendor: Wareorigin
Type:
Sku: WO0068
Available: Available
- This is a Bluetooth 4.0 module with 4pin base board that can support iphone4s or later.
- But does not support the version is lower than the android 4.3 phone(it don't support classic bluetooth 2.0 spp features)
- The core module is HM-10
- Operating voltage: 3.3V to 6V
- Low Energy: With HM-10 bluetooth 4.0 module, you can add Bluetooth features to your project and support iphone4s or later.
- DSD TECH Brand 4pin Base Board: Through this base board, leads to VCC, GND, TX, RX. You can be very convenient to connect to your arduino project
- Led status indication: when the connection is established will always light, disconnection is flash
- Support:You can make this module into ibeacon mode.So you can have your own ibeacon.it also Supports Apple Notification Center Service (ANCS)
working voltage 3.6 V to 6V,Default rate of 9600.
- How to Enable Apple Notification Center Service (ANCS) ANCS function
1.1 Please read apple notification ducument first
1.2 Send AT+TYPE3 command change to AUTH and BOND mode.
1.3 Send AT+ANCS1 command to open ANCS.
1.4 Send AT+PASS[para1] command to set passcode. Default passcode is "000000"
1.5 Send AT+RESET to restart module.
Now you can use LightBlue to scan and made a connect with module.
iOS will ask you input passcode. please input your passcode value.
If all is okay, you should receive AT+ANCS[para1] command from module UART.
- 1 x 4.0 BLE iBeacon UART Module
Related product
Breadboard Jumper Wires Dupont Cable Assorted Kit (40 Pcs)
Regular price
$2.90
Wareorigin Basic Starter Kit with Breadboard, Power Supply, Jumper Wires, Resistors, LED, Compatible with Arduino R3, Mega2560, Nano, Raspberry Pi
Regular price
$12.99
Sale price
$10.99
MEGA328P Board (Arduino Compatible)
Regular price
$18.90
Sale price
$15.90
GY-271 QMC5883L Triple Axis Compass Magnetometer Sensor Module
Regular price
$13.90
Sale price
$11.90
